Gripset OP Non Porous Primer

Gripset OP is a solvent free primer specifically developed with adhesion enhancing properties on metals, non-porous, dense and smooth substrates. It is designed for use on both vertical and horizontal surfaces, achieving high adhesion without the need for etching or using solvents. Ideally suited for the application of Gripset membrane coatings, adhesives and mortars to enable ease of bond to difficult substrates.

Features & Benefits :

• Solvent free alternative to dangerous solvent based primers.
• Bonds to a variety of metal, plastic, glazed, smooth & dense surface.
• Super adhesion properties.
• Ease of application.
• Very low dirt retention, non-tacky.
• Suitable for internal and external applications.
• Can be directly covered over with Gripset membranes or enhanced adhesives and mortars.
• Time saving, user friendly and environmentally safe.

Substrates :

• Metals including: galvanised iron, zincalume, aluminium, stainless steel, copper, brass treated steel, colorbond sheeting.
• Precast and tilt up concrete, glass reinforced concrete.
• Hardwood and dense timber surfaces.
• Existing ceramic tiles, vitrified tiles and natural stone.
• Brickwork (clay and concrete)
• Compressed cement sheeting, plasterboard surfaces • James Hardie™ Scyon™ Secura™ external/internal flooring.
• Polymer mortars, synthetic mortars, smooth self-levelling compounds.
• Marine plywood and timber sheet surfaces.
• Glass • Rigid plastic surfaces.
• Existing water based paint work and acrylic membrane coatings.
• General surfaces where absorbing primers are not suitable or where adhesion enhancement is required agent.

IMPORTANT : OP Primer does not replace a required waterproofing membrane system. When tiling over existing tiles for in internal/ external wet areas, OP Primer must be covered with a suitable under tile membrane system. Refer to Gripset under tile membrane systems for further details

Precautions :

• Not to be used as primer for areas with rising moisture or negative hydrostatic pressure.
• Not designed as a trafficable/exposed surface finish.
• Not suitable for applications where solvent based materials are to be directly applied over the primer surface, e.g. adhesives, coatings, paints.
• Ensure primer is dried before applying subsequent membranes, coatings, adhesives.
• Must be overcoated with suitable under tile membrane system when tiling over existing tiles in internal/external wet areas.
• Safety Data Sheet (SDS) available.
• For further information about this product contact technical department of Gripset Industries.